Thank you for purchasing the Clarion Product.
∗ Please read this owner’s manual in its entirety before operating this equipment.
∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment).
∗ Check the contents of the enclosed warranty card (ADB340MP only) and keep it carefully with this
manual.
Contents
1. FEATURES ..................................................................................................................................... 2
2. PRECAUTIONS .............................................................................................................................. 3
Flip Down Panel .............................................................................................................................. 3
3” (8 cm) Compact Discs ................................................................................................................ 3
Handling Compact Discs................................................................................................................. 4
Handling Cassette Tapes ................................................................................................................ 4
3. CONTROLS .................................................................................................................................... 5
4. NOMENCLATURE .......................................................................................................................... 6
Names of the Buttons and their Functions ..................................................................................... 6
Display Items................................................................................................................................... 7
LCD Screen ..................................................................................................................................... 7
5. OPERATIONS ................................................................................................................................. 8
Basic Operations ............................................................................................................................. 8
Radio Operations .......................................................................................................................... 10
CD/MP3 Operations ...................................................................................................................... 12
Tape Operations ............................................................................................................................ 15
Operations Common to Each Mode ............................................................................................. 16
6. IN CASE OF DIFFICULTY ............................................................................................................ 19
7. ERROR DISPLAYS....................................................................................................................... 20
8. SPECIFICATIONS ........................................................................................................................ 20
1. FEATURES
■
■
■
■
■
■
■
8-Times Oversampling Digital Filter and Dual 1-Bit D/A Converters
Zero-Bit DetectorTM Mute Circuit
Full Logec Tape Transport with True Function / Auto Reverse with Dual Azimuth Adjust
®
FM Reception System
Capability to Read CD TEXT Data
4 Pre-Programmed Graphic Equalizer Memories
2-Channel RCA Line Level Output
2
ADZ625
Handling Compact Discs
2. PRECAUTIONS
Use only compact discs bearing the
or
mark.
1. When the inside of the car is very cold and
the player is used soon after switching on the
heater, moisture may form on the disc or the
optical parts of the player and proper play-
back may not be possible. If moisture forms
on the disc, wipe it off with a soft cloth. If mois-
ture forms on the optical parts of the player,do
not use the player for about one hour. The
condensation will disappear naturally allow-
ing normal operation.
2. Driving on extremely bumpy roads which
cause severe vibration may cause the sound
to skip.
Do not play heart-shaped, octagonal, or other specially shaped compact discs.
Some CDs recorded in CD-R/CD-RW mode may not be usable.
3. This unit uses a precision mechanism. Even
in the event that trouble arises, never open
the case, disassemble the unit, or lubricate
the rotating parts.
Handling
• To remove a compact disc from its storage case,
• Compared to ordinary music CDs, CD-R and CD-
RW discs are both easily affected by high tem-
perature and humidity and some of CD-R and
CD-RW discs may not be played. Therefore, do
not leave them for a long time in the car.
• New discs may have some roughness around
the edges. If such discs
press down on the center of the case and lift the
disc out, holding it carefully by the edges.
• Do not use commercially available CD protec-
tion sheets or discs equipped with stabilizers, etc.
These may damage the disc or cause breakdown
of the internal mechanism.
This equipment has been tested and found to
comply with the limits for a Class B digital de-
vice, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a resi-
dential installation.
This equipment generates, uses, and can radi-
ate radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio com-
munications. However, there is no guarantee that
interference will not occur in a particular instal-
lation.
Ball-point pen
Flip Down Panel
are used, the player may
not work or the sound may
skip. Use a ball-point pen
or the like to remove any
roughness from the edge
of the disc.
• Never stick labels on the surface of the compact
disc or mark the surface with a pencil or pen.
• Never play a compact disc with any cellophane
tape or other glue on it or with peeling off marks.
If you try to play such a compact disc, you may
not be able to get it back out of the CD player or
it may damage the CD player.
• Do not use compact discs that have large
scratches, are misshapen, cracked, etc. Use of
such discs may cause misoperation or damage.
Storage
Roughness
• Do not expose compact discs to direct sunlight
or any heat source.
This unit uses a flip-down structure that makes
possible large-size display.
• Do not expose compact discs to excess hu-
midity or dust.
• Do not expose compact discs to direct heat
from heaters.
CAUTION
When opening and closing the FLIP DOWN
PANEL, be careful not to catch your fingers.
They could be injured.
Cleaning
• To remove fingermarks and dust, use a soft
cloth and wipe in a straight line from the center
of the compact disc to the circumference.
• Do not use any solvents, such as commercially
available cleaners, anti-static spray or thinner
to clean compact discs.
1. Always use this unit with the FLIP DOWN
PANEL closed.
If this equipment does cause harmful interfer-
ence to radio or television reception, which can
be determined by turning the equipment off and
on, the user is encouraged to consult the dealer
or an experienced radio/TV technician for help.
2. Do not force operations or use this device
abnormally when opening or closing the FLIP
DOWN PANEL.
• After using special compact disc cleaner, let
the compact disc dry off well before playing it.
3. Do not use the FLIP DOWN PANEL as a tray
to place objects on when it is open.
CAUTION
Handling Cassette Tapes
4. When closing the FLIP DOWN PANEL, do not
press the [OPEN] button.
USE OF CONTROLS, ADJUSTMENTS, OR PER-
FORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN, MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
Using any of the following types of cassette tapes
can cause malfunctions.
• Avoid using cassettes of 120 minutes or longer.
(Such cassettes have extremely thin tape, so
the tape can become stretched or cut.)
• Periodically play a cleaning cassette in the
player to clean the head.
• Keep magnets, screwdrivers, and other iron
and steel and magnetic items away from both
cassette tapes and the tape head in the player.
• Do not oil the cassette mechanism.
• Do not use any cassette tapes with peeling la-
bels or deformed cases. Such cassette tapes
can cause breakdowns.
• When not using the player, always take the cas-
sette out of the mechanism. Exposing a cas-
sette to direct sunlight, extreme temperatures,
or high humidity can damage the cassette.
5. Strong impacts to the operating or display
section can cause damage or deformation.
• Cassette tapes with low recording levels
• Cassette tapes in which the unrecorded sec-
tion between songs is shorter than 4 seconds
• Cassette tapes with noise or the like recorded
between songs
6. If the FLIP DOWN PANEL does not open fully,
gently open it with your hand.
THE COMPACT DISC PLAYER SHOULD NOT BE
ADJUSTED OR REPAIRED BYANYONEEXCEPT
PROPERLY QUALIFIED SERVICE PERSONNEL.
CHANGES OR MODIFICATIONS NOT EX-
PRESSLYAPPROVED BY THE MANUFACTURER
FOR COMPLIANCE COULD VOID THE USER’S
AUTHORITY TO OPERATE THE EQUIPMENT.
3” (8 cm) Compact Discs
• Cassette tapes on which there are long unre-
corded sections in the middle of a song
Handling precautions
CAUTION
INFORMATION FOR USERS:
• Slack in the tape can cause malfunctions. In
particular for prerecorded
cassette tapes and 90-
minute tapes, take up any
slack in the tape before
inserting it into the cas-
sette player.
3” (8 cm) disc can’t be played. Using an
adapter and inserting them into this unit can
cause damage, please do not insert by any
means.
CHANGES OR MODIFICATIONS TO THIS
PRODUCT NOT APPROVED BY THE MANU-
FACTURER WILL VOID THE WARRANTY AND
WILL VIOLATE FCC APPROVAL.
MODEL
12V
–
GROUND
AM 530-1710kHz/FM 87.9- 107.9MHz
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED
OPERATION.
Be sure to unfold and read the next page.
Veuillez déplier et vous référer à la page suivante.
Cerciórese de desplegar y de leer la página siguiente.
THIS PRODUCTION COMPLIES WITH DHHS RULES 21 CFR
SUBCHAPTER
J
APPLICABLE AT DATE OF MANUFACTURE.
CLARION CO., LTD.
50 KAMITODA, TODA-SHI, SAITAMA-KEN, JAPAN
MANUFACTURED:
28A5
Clarion Co., Ltd.
MADE IN INDONESIA
Top View of Source Unit
SERIAL No.
PE-2652B
ADB340MP/ADB341MP
3
ADB340MP/ADB341MP
4
3. CONTROLS/LES COMMANDES/CONTROLES/
4. NOMENCLATURE
Note:
• Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold).
Names of the Buttons and their Functions
Source unit / Appareil pilote / Unidad fuente /
[TITLE]
[OPEN]
[ISR] button
[RDM]
[CD SLOT]
[RPT]
• Recalls ISR radio station in memory.
Press and hold for 1 seconds or longer: Stores
current station into ISR memory (radio mode
only).
• Press to open the Flip down panel.
[CD EJECT]
[OPEN]
[RPT] button
• Plays repeatedly while in the CD/MP3 mode.
• In the tape mode, enables repeat play.
• When held depressed for one second or more,
enables blank-skip mode.
• Press and hold for 1 second or longer to per-
form folder repeat play while in the MP3 mode,
or BLS while in the tape mode.
[SCN]
[FNC]
[BND]
[
] button
[EQ]
• Plays or pauses a CD/TAPE while in the CD/
MP3 or TAPE mode.
[SPE/ANA]
• After selecting various setting options, press
this button to confirm the settings.
[PRESET]
[VOLUME]
[
], [
] buttons
[CD SLOT]
• CD insertion slot.
• Selects a station while in the radio mode or se-
lects a track when listening to a CD. These but-
tons are used to make various settings.
[MEMO]
[A-M]
[TITLE] button
• Use the button to input a title in the CD/MP3
mode.
• Press and hold the button for 1 second or longer
to enter the adjust mode.
[MUTE] button
• Turns mute on and off.
[ISR]
[DISP]
[
]
[DISP] button
• Switches the display indication (Main display,
sub display, clock display).
• Press and hold for 1 second or longer to switch
the CD title.
[MUTE]
[
], [
]
[RDM] button
• Performs random play while in the CD/MP3
mode.
• Press and hold for 1 second or longer to per-
form folder ramdom play while in the MP3
mode.
With the FLIP DOWN PANEL opened / Avec la CONSOLE RABATTABLE ouverte
/
/
Con el PAÍNEL ABATÍBLE abierto.
[MEMO] button
• Use to change and store items in preset
[TAPE SLOT]
[CD EJECT] button
memory.
• Ejecting a CD.
• Press and hold the button for more than 10 sec-
onds to reset this unit.
[PRESET] knob
• Stores a station into memory or recall it directly
while in the radio mode.
[EQ] button
• In EQ mode, use to select menu.
• In adjust modes, use to select items for adjust-
ment.
• Press to select EQ menu.
• Press and hold for 1 second or longer to set
EQ effects to ON/OFF.
• Selects a Folder while in the MP3 playback.
[SPE/ANA] button
• Press to change the spectrum analyzer display.
[BND] button
• Switches the band, or seek tuning or manual
tuning while in the radio mode.
[VOLUME] knob
• Adjust the volume by turning the knob clock-
wise or counterclockwise.
• Plays a first track while in the CD/MP3 mode.
• In tape mode, changes the side played (direc-
tion of tape travel).
• Use the knob to perform various settings.
[TAPE EJECT]
[FNC] button
[A-M] button
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.
Remarque:Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre.
Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas.
• Press the button to turn on the power.
Press and hold the button for 1 second or longer
to turn off the power.
• Switches the operation mode among the radio
mode, etc.
• Press and hold the button for 1 second or longer
to turn on or off the MAGNA BASS EXTEND.
• Use the button to switch to the audio mode
(bass/mid/treble, balance/fader adjustment)
5
ADB340MP/ADB341MP
6
ADB340MP/ADB341MP
[SCN] button
[TAPE SLOT]
• Performs preset scan while in the radio mode.
When the button is pressed and held, auto store
is performed.
• Performs scan play for 10 seconds for each track
while in the CD/MP3 and tape mode.
• Press and hold for 1 second or longer to per-
form folder scan play while in the MP3 mode.
• Cassette tape insertion slot.
[TAPE EJECT] button
• Ejecting a tape.
Display Items
: EQ indication
Spectrum analyger display
: MP3 indication
: BLS (Blank skip) indication
: Manual indication
: Stereo indication
: Folder scan / Folder repeat /
Folder random indication
: Scan indication
: Repeat indication
: Random indication
: Mute indication
: MAGNA BASS EXTEND indication
Operation status indication
• The frequency, Title, play time, CT(clock),
etc. are displayed.
Preset channel indication (1 to 6)
Function mode indication
• The names of modes being selected,
etc. are displayed.
LCD Screen
In extreme cold, the screen movement may slow down and the screen may darken, but this is normal.
The screen will recover when it returns to normal temperature.
ADB340MP/ADB341MP
7
5. OPERATIONS
Note: Be sure to read this chapter referring to the front diagrams of
Basic Operations
chapter “3. CONTROLS” on page 5 (unfold).
Mute
CAUTION
Turning the volume down quickly.
Be sure to lower the volume before switch-
ing off the unit power or the ignition key. The
unit remembers its last volume setting. If you
switch the power off with the volume up, when
you switch the power back on, the sudden
loud volume may hurt your hearing and dam-
age the unit.
Press the [MUTE] button.
Each time the button is pressed the Mute turns
ON or OFF.
When it’s ON, the “MUTE” indicator blinks.
Switching the display
The clock is displayed when the ignition key
is turned to the ACC (accessory) or IGN (igni-
tion-on) position even when the unit power
is off. In some cars, the clock may momen-
tarily disappear when the ignition key is
turned to the START position. The clock will
reappear after the engine has started and the
ignition key is released to the IGN (ignition-
on) position.
Press the [DISP] button to select the desired dis-
play.
Each time you press the [DISP] button, the dis-
play switches in the following order:
➜➜In Tuner source
Frequency ➜ Clock ➜ Frequency...
➜➜In CD source
Clock ➜ Track Number & Track Time ➜ Clock...
Turning on/off the power
Notes:
• Be careful about using this unit for a long time with-
out running the engine. If you drain the car’s bat-
tery too far, you may not be able to start the en-
gine and this can reduce the service life of the
battery.
➜➜In Tape source
Playback direction & Current status ➜ Current
status ➜ Clock ➜ Playback direction & Current
status...
∗ Once selected, the preferred display becomes
the display default. When a function adjustment
such as volume is made, the screen will mo-
mentarily switch to that function’s display, then
revert back to the preferred display several
seconds after the adjustment.
∗ When you have entered a title in a CD, it ap-
pears in the main display. If you have not en-
tered a title, “NO-TITL” appears in the title dis-
play instead. For information on how to enter a
title, refer to the subsection “Entering titles”in
the “Operations Common to Each Mode”.
1. Press the [FNC] button.
2. The illumination and display on the unit light
up. The unit automatically remembers its last
operation mode and will automatically switch
to display that mode.
3. Press and hold the [FNC] button for 1 second
or longer to turn off the power for the unit.
Selecting a mode
1. Press the [FNC] button to change the mode
of operation.
2. Each time you press the [FNC] button, the
mode of operation changes in the following
order:
Radio mode ➜ CD mode ➜ Tape mode ➜
AUX mode ➜ Radio mode...
Adjusting the volume
Turning the [VOLUME] knob clockwise to in-
crease the volume, or turning the [VOLUME]
knob counterclockwise to decrease the volume.
∗ The volume level is from 0 (minimum) to 35 (maxi-
mum).
8
ADB340MP/ADB341MP
Basic Operations
Adjusting the fader
Adjusting the bass
This adjustment can be performed when the EQ
1. Press the [A-M] button and select “FAD”.
operation is set to “OFF”.
2. Turning the [VOLUME] knob clockwise to em-
phasize the sound from the front speakers, or
turning the [VOLUME] knob counterclockwise
to emphasize the sound from the rear speak-
ers.
1. Press the [A-M] button and select “BASS”.
2. Turning the [VOLUME] knob clockwise to em-
phasize the bass, or turning the [VOLUME]
knob counterclockwise to attenuate the bass.
∗ The factory default setting is “0”. (Adjustment
∗ The factory default setting is “0”. (Adjustment
range: F9 to R9)
range: −7 to +7)
3. When the adjustment is complete, press
the[A-M] button several times until the func-
tion mode is reached.
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting MAGNA BASS EXTEND
Adjusting the middle
The MAGNA BASS EXTEND does not adjust the
low sound area like the normal sound adjustment
function, but emphasizes the deep bass sound
area to provide you with a dynamic sound.
This adjustment can be performed when the EQ
operation is set to “OFF”.
1. Press the [A-M] button and select “MID”.
2. Turning the [VOLUME] knob clockwise to empha-
size the treble, or turning the [VOLUME]knob coun-
terclockwise to attenuate the treble.
∗ The factory default setting is “OFF”.
1. Press and hold the [A-M] button for 1 second
or longer to turn on the MAGNA BASS EX-
TEND effect. “MB-EX” lights in the display.
∗ The factory default setting is “0”. (Adjustment
range: −7 to +7)
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
2. Press and hold the [A-M] button for 1 second
or longer to turn off the MAGNA BASS EX-
TEND effect. “MB-EX” goes off in the display.
Selecting the EQ menu
About the EQ function:
Adjusting the treble
This adjustment can be performed when the EQ
The Equalizer allows correction and modification
of the frequency response for selected frequency
ranges, thus allowing the creation of your own
unique sound.
operation is set to “OFF”.
1. Press the [A-M] button and select “TREB”.
2. Turning the [VOLUME] knob clockwise to empha-
size the treble, or turning the [VOLUME]knob coun-
terclockwise to attenuate the treble.
1. Press the [EQ] button.
2. Turning the [PRESET] knob either clockwise
or counterclockwise to select the desired EQ
menu.
∗ The factory default setting is “0”. (Adjustment
range: −7 to +7)
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
∗ EQ menus cannot be memorized per CD and ra-
dio mode, etc.
G EQ menus
Adjusting the balance
1. Press the [A-M] button and select “BAL”.
IMPACT
: Low and high frequencies empha-
sized.
B-BOOST : Low frequencies emphasized.
2. Turning the [VOLUME] knob clockwise to empha-
size the sound from the right speaker, or turning
the [VOLUME] knob counterclockwise to empha-
size the sound from the left speaker.
ACOUSTIC : Medium frequencies (vocals) em-
phasized.
FLAT
: Original sound.
∗ The factory default setting is “0”. (Adjustment
range: L9 to R9)
3. Press the [EQ] button to return to the original
mode.
3. When the adjustment is complete, press
the[A-M] button several times until the func-
tion mode is reached.
ADB340MP/ADB341MP
9
Basic Operations
Radio Operations
Setting EQ effects to ON/OFF
∗ The factory default setting is “ON”.
1. Press and hold the [EQ] button for 1 second
FM reception
For enhanced FM performance the
®
tuner includes signal actuated
or longer to turn off the EQ effect. “
goes off in the display.
”
stereo control and Multipath noise reduction cir-
cuits.
2. Press and hold the [EQ] button for 1 second
Listening to the radio
1. Press the [FNC] button and select the radio
or longer to turn on the EQ effect. “
lights in the display.
”
mode.
Switching the spectrum analyzer
display patterns
You can select one out of 9 patterns or set it to
off.
2. Press the [BND] button and select the radio
band. Each time the button is pressed, the
radio reception band changes in the follow-
ing order:
∗ The factory default setting is “SND BEAT”.
1. Each time you press the [SPE/ANA] button,
the spectrum analyzer display pattern
changes in the following order:
FM1 G FM2 G FM3 G AM G FM1...
3. Press the [
] or [
] button to tune in the
desired station.
SND BEAT G SND WAVE G SND RISE G
SND SNOW G CROSS G EXPAND G HO-
RIZON G SHADOW G S/A SCAN G S/A OFF
G SND BEAT...
Tuning
There are 3 types of tuning mode available, seek
tuning, manual tuning and preset tuning.
Note:
Seek tuning
1. Press the [BND] button and select the desired
The spectrum analyzer display is unavailable dur-
ing these operations below;
• Seek tuning and auto store in radio mode.
• Pause.
• When “NO DISC”, “NO CASS” or an error mes-
sage appears in the display.
• When fast-forwarding, fast-backwarding or paus-
ing the tape in tape mode.
band (FM or AM).
∗ If “
” is lit in the display, press and hold
the [BND] button for 1 second or longer. “
”
in the display goes off and seek tuning is now
available.
2. Press the [
] or [
] button to automati-
cally seek to the next station.
When the [
] button is pressed, the sta-
tion is sought in the direction of higher fre-
quencies; if the [
] button is pressed, the
station is sought in the direction of lower fre-
quencies.
Manual tuning
There are 2 ways available: Quick tuning and step
tuning.
When you are in the step tuning mode, the fre-
quency changes one step at a time. In quick tun-
ing mode, you can quickly tune the desired fre-
quency.
1. Press the [BND] button and select the desired
band (FM or AM).
∗ If “
” is not lit in the display, press and hold
the [BND] button for 1 second or longer. “
”
lights in the display and manual tuning is now
available.
2. Tune into a station.
10
ADB340MP/ADB341MP
Radio Operations
G Quick tuning:
Preset scan
Press and hold the [
manually tune to the desired frequency.
] or [
] button to
Preset scan receives the stations stored in pre-
set memory in order. This function is useful when
searching for a desired station in memory.
G Step tuning:
1. Press the [SCN] button.
Press the [
] or [
] button to manually tune
one step at a time to the desired frequency.
2. When a desired station is tuned in, press the
[SCN] button again to continue receiving that
station.
Storing a preset station
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exists to store individual radio sta-
tions in memory.
Note:
• Be careful not to press and hold the [SCN] button
for 2 seconds or longer, otherwise the auto store
function engages and the unit starts storing sta-
tions.
Manual memory
1. Select the desired station with seek tuning,
manual tuning or preset tuning.
Instant station recall (ISR)
Instant station recall is a special radio preset that
instantly accesses a favorite radio station at a
touch of a button. The ISR function even oper-
ates with the unit in other modes.
2. Press the [MEMO] button. “CH” blinks in the
display.
3. Turning the [PRESET] knob either clockwise
or counterclockwise to select the desired pre-
set memory.
G ISR memory
1. Select the station that you wish to store in ISR
memory.
4. Press and hold the [MEMO] button for 1 sec-
onds or longer to store that station into pre-
set memory.
2. Press and hold the [ISR] button for 1 seconds
or longer.
G Recalling a station with ISR
Auto store
Auto store selects up to 6 stations and automati-
cally stores them into preset memory.
In any mode, press the [ISR] button to turn on
the radio function and tune the selected radio
station. “ISR” appears in the display. Press the
[ISR] button again to return to the previous mode.
1. Press the [BND] button and select the desired
band (FM or AM).
2. Press and hold the [SCN] button for 2 sec-
onds or longer. The stations with good recep-
tion are stored automatically to the preset
memory.
Recalling a preset station
Turning the [PRESET] knob either clockwise or coun-
terclockwise to recall the stored radio frequency auto-
matically.
1. Press the [BND] button and select the desired
band (FM1, FM2, FM3 or AM).
2. Turning the [PRESET] knob either clockwise
or counterclockwise to recall the stored sta-
tion.
ADB340MP/ADB341MP
11
CD/MP3 Operations
What is MP3?
Multisession function
MP3 is an audio compression method and clas-
sified into audio layer 3 of MPEG standards.
When a disc contains both normal CD type tracks
and MP3 type tracks mixedly, you can select
which type of the recorded tracks to play.
This audio compression method has penetrated
into PC users and become a standard format.
G Default value is “CD”.
This MP3 features the original audio data com-
pression to about 10 percent of its initial size with
a high sound quality. This means that about 10
music CDs can be recorded on a CD-R disc or
CD-RW disc to allow a long listening time with-
out having to change CDs.
Each time you press and hold the [BND] button
for 1 second or longer, the mixed mode is
switched between CD type or MP3 type.
The following indication appears in the title dis-
play when switching the track type to be played.
Precautions when creating MP3 disc
G Usable sampling rates and bit rates:
1. MP3: Sampling rate 8k Hz-48 kHz,
Bit rate: 8 kbps-320 kbps / VBR
G Display when CD type track is selected:
G File extensions
1. Always add a file extension “.MP3” to MP3
G Display when MP3 type track is selected:
file by using single byte letters.
If you add a file extension other than speci-
fied or forget to add the file extension , the
file cannot be played.
1. Types of recording that can be played are as
follows.
Setting
Set to CD Set to MP3
Disc
2. Files without MP3 data will not play.
The indication “– –:– –” appears in the play
time display if you attempt to play files with-
out MP3 data.
Mixed with CD and
Play CD
Play CD
Play MP3
Play MP3
Play CD
MP3 type tracks
CD type track
only
MP3 type track
only
G Logical format (File system)
1. When writing MP3 file on a CD-R disc or CD-
RW disc, please select “ISO9660 level 1, 2 or
JOLIET or Romeo” as the writing software
format. Normal play may not be possible if
the disc is recorded on another format. This
equipment does not support packet writing.
Play MP3
2. After making these settings, remove the disc
and then reinsert it.
3. When a mixed mode CD is loaded and CD is
set, the track to be played first is MP3 file data
and no sound is heard.
2. The folder name and file name can be dis-
played as the title during MP3 play but the
title must be within 64 single byte alphabeti-
cal letters and numerals (including an exten-
sion). 32 characters when written in JOLIET
format.
Loading a CD
Insert a CD into the center of the insertion slot
with the label side facing up. The CD plays auto-
matically after loading.
3. Do not affix a name to a file inside a folder
having the same name.
Notes:
• Never insert foreign objects into the CD insertion
slot.
• When a CD is loaded in the unit, never try to in-
sert another CD in this case.
G Folder structure
1. A disc with a folder having more than 8
hierarchical levels will be impossible.
G Number of files or folders
1. Up to 256 files (total number of folder and file)
can be played. The root folder is counted as
one folder.
• Discs not bearing the
or
mark and
CD-ROMs cannot be played by this unit.
• Some CDs recorded in CD-R mode may not be
usable.
• Even when recorded in CD-RW mode, some CDs
not be usable.
2. Tracks are played in the order that they were
recorded onto a disc. (Tracks might not al-
ways be played in the order displayed on the
PC.)
3. Some noise may occur depending on the type
of encoder software used while recording.
12
ADB340MP/ADB341MP
CD/MP3 Operations
Ejecting a CD
Selecting a track
Press [CD EJECT] button to eject the CD. Take
G Track-up
it out from the ejected position.
1. Press the [
] button to move ahead to the
∗ If a 5" CD (12 cm) is left in the ejected position for
15 seconds, the CD is automatically reloaded
(Autoreload).
∗ The Radio mode is selected automatically 4 sec-
onds after the [CD EJECT] button is pressed.
beginning of the next track.
2. Each time you press the [
] button, the
track advances ahead to the beginning of the
next track.
G Track-down
Notes:
1. Press the [
] button to move back to the
• If you force a CD into before auto reloading, this
can damage the CD.
beginning of the current track.
2. Press the [
] button twice to move to the
beginning of the previous track.
CAUTION
3” (8 cm) disc can’t be played. Using an
adapter and inserting them into this unit can
cause damage, please do not insert by any
means.
Fast-forward/fast-backward
G Fast-forward
Press and hold the [
longer.
] button for 1 second or
Listening to a CD already inserted
G Fast-backward
Press the [FNC] button to select the CD mode.
Play starts automatically. If no CD is loaded in
the unit, “NO DISC” appears in the display.
Press and hold the [
longer.
] button for 1 second or
Folder Select
Pausing play
This function allows you to select a folder con-
taining MP3 files and start playing from the first
track in the folder.
1. Press the [
] button to pause play.
“PAUSE” appears in the display.
2. To resume CD play, press the [
again.
] button
1. Turning the [PRESET] knob clockwise or
counterclockwise to select a folder. The folder
name is displayed.
Displaying CD titles
This unit can display title data for CD-text/MP3
disc and user titles input with this unit.
1
Root folder
1. Press the [DISP] button to display the title.
2. Each time you press and hold the [DISP] but-
ton for 1 second or longer, the title display
changes in the following order:
2
3
4
5
G CD-TEXT disc
User title (disc) G Disc title (CD-text) G Artist
name (CD-text) G Track title (CD-text) G User
title (disc)...
G MP3 disc
Folder G File G Album TAG G Artist TAG G Title
TAG G Folder...
Notes:
• If the CD playing is not a CD-text CD or no user
title has been input, “NO TITL” appears in the dis-
play.
∗ Folder without an MP3 file is not selectable.
• If MP3 disc is not input TAG, “NO TAG” appears
in the display.
2. To select a track, press the [
button.
] or [
]
• For MP3, supports ID3 Tags V1 / 2
• Only ASCII characters can be displayed in Tags.
Up to 64 characters.
ADB340MP/ADB341MP
13
CD/MP3 Operations
Top function
The top function resets the CD player to the first
track of the disc. Press the [BND] button to play
the first track (track No. 1) on the disc.
The play status indications such “FOLDER”
and “RPT” disappear from the display and
normal play resumes from the track currently
being played.
Random play
Scan play
The random play selects and plays individual
tracks on a folder of the playing disc in no par-
ticular order. This function continues automati-
cally until it is canceled.
The scan play locates and plays the first 10 sec-
onds of each track on a disc automatically. This
function continues on the disc until it is canceled.
∗ The scan play is useful when you want to select a
desired track.
1. Press the [RDM] button. “RDM” lights in the
display, an individual track is selected ran-
domly and play begins.
1. Press the [SCN] button to start track scan-
ning. “SCN” lights in the display.
2. To cancel the random play, press the [RDM]
button again. “RDM” goes off from the dis-
play and normal play resumes.
2. To cancel the scan play, press the [SCN] but-
ton again. “SCN” goes off from the display and
the current track continues to play.
Folder Random play
Folder Scan play
This function allows you to play all the tracks of
all the folders recorded on an MP3 disc in a ran-
dom order.
This function allows you to locate and play the
first 10 seconds of the first track of all the folders
on an MP3 disc.
1. Press and hold the [RDM] button for 1 sec-
ond or longer to perform folder random play.
The indications “FOLDER” and “RDM” light
up, and then folder random play starts.
1. Press and hold the [SCN] button for 1 second
or longer to folder scan play.
The indications “FOLDER” and “SCN” light up
in the display, and then folder scan play starts.
2. To cancel folder random play, press the [RDM]
button again.
2. To cancel folder scan play, press the [SCN]
button again.
The play status indications such as “FOLDER”
and “RDM” disappear from the display and
normal play resumes from the track currently
being played.
The play status indications such as “FOLDER”
and “SCN” disappear from the display and the
current track is played.
Repeat play
The repeat play continuously plays the current
track. This function continues automatically until
it is canceled.
1. Press the [RPT] button. “RPT” lights in the
display and the current track is repeated.
2. To cancel the repeat play, press the [RPT]
button again. “RPT” goes off from the display
and normal play resumes.
Folder Repeat play
This function allows you to play a track currently
being played in the MP3 folder repeatedly.
1. Press and hold the [RPT] button for 1 second
or longer to perform folder repeat play.
The indications “FOLDER” and “RPT” light up,
and then folder repeat play starts.
2. To cancel folder repeat play, press the [RPT]
button again.
14
ADB340MP/ADB341MP
Tape Operations
Loading a tape
Switching to the other side of the tape
1. Press the [OPEN] button to open the flip down
1. Press the [BND] button to change tape direc-
panel.
tion and playback.
∗ The tape mechanism automatically reverses di-
rection and engage playback at the end of the tape
(auto reverse).
2. Load a tape into the cassette tape insertion
slot.
Ejecting a tape
1. Press the [OPEN] button to open the flip down
Fast-forward/fast-backward
G Fast-forward
panel.
Press the [
] button.
2. Press the [TAPE EJECT] button to eject a
G Fast-backward
tape. Take it out from the ejected position.
Press the [
] button.
∗ The radio mode is selected automatically few sec-
onds after the [TAPE EJECT] button is pressed.
G Canceling FF/REW
Press the [
] button.
CAUTION
• Be sure to use this unit with the Flip down
panel closed.
APC (Auto Program Control) function
The APC function allows the tape to skip forward
to the beginning of the next track or rewind to
the start of the current track.
• Do not put any object or use it like a tray
when the Flip down panel is open in a lying
position.
G Skipping forward to the next track (“APC-
FF”)
• Be careful not to pinch your finger or hands
when opening and closing the Flip down
panel.
During tape playback, press the [
] button
twice to fast-forward to the next track. The next
track stars playing.
Listening to a tape already inserted
Press the [FNC] button to select the tape mode.
Play starts automatically. If no tape is loaded in
the unit, “NO CASS” appears in the display.
G Skipping backward to the current track
(“APC-REW”)
During tape playback, press the [
] button
twice to rewind to the start of the current track.
The current track plays from the beginning.
G Listening to another source while using FF
or REW and APC (“monitor mode”)
Pressing the [FNC] button allows to set radio
mode or CD/MP3 mode while fast-forwarding the
tape, rewinding it, or searching for the begining
of a tune in it.
G Canceling FF/REW APC to resume playback
Press the [
] button.
Intro tape scan play
The intro tape scan allows the first 10 seconds
of all the tracks on the tape to be played. This
function continues on the tape until it is canceled.
Note:
• Use the [FNC] button and select the tape function
to resume tape playback.
1. Press the [SCN] button to start Intro tape scan.
“SCN” lights in the display.
Pausing play
2. To cancel the intro tape scan, press the [SCN]
button again. “SCN” goes off from the display
and the current track continues to play.
1. Press the [
] button to pause play.
“PAUSE” appears in the display.
2. To resume tape play, press the [
again.
] button
∗ When the end of the tape is reached during
the intro tape scan, the tape mechanism auto-
matically reverses direction and continues the
intro tape scan.
∗ If you select another mode during the intro tape
scan, the mechanism automatically makes the
intro tape scan stop when it finds the next
track(APC function).
ADB340MP/ADB341MP
15
Tape Operations
Tape repeat play
Operations Common to Each Mode
Setting the clock
The tape repeat continuously plays the current
track. This function continues automatically until
it is canceled.
1. Press and hold the [TITLE] button for 1 sec-
ond or longer to switch to the adjustment se-
lection display.
1. Press the [RPT] button. “RPT” lights in the
2. Press the [
3. Press the [
] button.
] or [
display and the current track is repeated.
] button to select the
2. To cancel the repeat play, press the [RPT]
button again. “RPT” goes off from the display
and normal play resumes.
hour or the minute.
4. Turning the [VOLUME] knob either clockwise
or counterclockwise to set the correct time.
The clock is displayed in 12-hour format.
Blank tape skip
The blank tape skip allows you to skip blank sec-
tions of tape that are over 12 seconds long.
5. Press the [
memory.
] button to store the time into
6. Press the [TITLE] button to return to the pre-
1. Press and hold the [RPT] button for more than
1 seconds. The blank skip feature will be set
and “BLS” will light on the display. When there
is an unrecorded section of more than 12 sec-
onds, “BLS” will light on the display and the
section will be skipped.
vious mode.
Note:
• You cannot set the clock when it is displayed with
only the ignition on. If you drain or remove the car’s
battery or take out this unit, the clock is reset. While
setting the clock, if another button or operation is
selected, the clock set mode is canceled.
2. To cancel the blank skip feature, press and
hold the [RPT] button again for more than 1
second. “BLS” on the display will disappear.
Setting the sensitivity of the spec-
trum analyzer
Notes:
∗ The factory default setting is “MID”.
1. Press and hold the [TITLE] button for 1 sec-
ond or longer to switch to the adjustment se-
lection display.
The APC, intro tape scan, tape repeat and blank
skip may not work properly with tapes of the follow-
ing qualities:
• Tapes on which the recording level is too low.
• Tapes on which there is much noise between se-
lections.
• Tapes on which there are long pauses in the middle
of selections.
• Tapes on which there are less than 4 seconds of
blank space between selections.
2. Press the [
] or [
] button to select “ANA
SENS”.
3. Turning the [VOLUME] knob either clockwise
or counterclockwise to set the sensitivity of
the spectrum analyzer.
You can choose one of “LOW”, “MID” or
“HIGH” for the sensitivity of the spectrum ana-
lyzer.
4. Press the [TITLE] button to return to the pre-
vious mode.
Setting the speed of the spectrum
analyzer display
∗ The factory default setting is “LOW”.
1. Press and hold the [TITLE] button for 1 sec-
ond or longer to switch to the adjustment se-
lection display.
2. Press the [
] or [
] button to select “ANA
SPD”.
3. Turning the [VOLUME] knob either clockwise
or counterclockwise to set the speed of the
spectrum analyzer display.
You can choose one of “LOW”, “MID” or
“HIGH” for the speed of the spectrum ana-
lyzer display.
16
ADB340MP/ADB341MP
Operations Common to Each Mode
4. Press the [TITLE] button to return to the pre-
1. Press and hold the [TITLE] button for 1 sec-
ond or longer to switch to the adjustment se-
lection display.
vious mode.
Message display
2. Press the [
] or [
] button and select
“SCRNSVR ”.
When the unit is powered on or off, a message is
displayed. The user can turn this message dis-
play on or off.
3. Press the [
] button.
4. Turning the [VOLUME] knob clockwise to
∗ The factory default setting is “ON”.
1. Press and hold the [TITLE] button for 1 sec-
ond or longer to switch to the adjustment se-
lection display.
“ON” or counterclockwise to “OFF”.
5. Press the [TITLE] button to return to the pre-
vious mode.
2. Press the [
] or [
] button to select
Adjusting the display contrast
You can adjust the display contrast to match the
angle of installation of the unit.
“MESSAGE”.
3. Turning the [VOLUME] knob clockwise to set
the message display to “ON”, or turning the
[VOLUME] knob counterclockwise to set the
message display to “OFF”.
∗ The factory default setting is “5”. (Adjustment level:
0 to 10)
1. Press and hold the [TITLE] button for 1 sec-
ond or longer to switch to the adjustment se-
lection display.
4. Press the [TITLE] button to return to the pre-
vious mode.
2. Press the [
] or [
] button to select
Setting the method for title scroll
“CONTRAST”.
Set how to scroll in CD-TEXT or MP3 Title.
3. Turning the [VOLUME] knob clockwise or
∗ The factory default setting is “ON”.
1. Press and hold the [TITLE] button for 1 sec-
ond or longer to switch to the adjustment se-
lection display.
counterclockwise to adjust the contrast.
4. Press the [TITLE] button to return to the pre-
vious mode.
2. Press the [
] or [
] button to select
Selecting AUX IN sensitivity
“SCROLL”.
Make the following settings to select the sensi-
tivity when sounds from external devices con-
nected to this unit are difficult to hear even after
adjusting the volume.
3. Turning the [VOLUME] knob clockwise or
counterclockwise and select “ON” or “OFF”.
G ON:
∗ The factory default setting is “MID”.
1. Press and hold the [TITLE] button for 1 sec-
ond or longer to switch to the adjustment se-
lection display.
To scroll automatically.
G OFF:
To scroll just 1 time when the title was changed
or the title key was pressed.
2. Press the [
] or [
] button to select “AUX
4. Press the [TITLE] button to return to the pre-
SENS”.
vious mode.
3. Turning the [VOLUME] knob clockwise or
counterclockwise as needed and select from
“HIGH”, “MID” or “LOW”.
Turning the screen saver function
on or off
This unit is provided with the screen saver func-
tion which allows you to show various kinds of
patterns and characters in the Operation Status
indication area of the display. You can turn on
and off this function.
If the button operation is performed with the
screen saver function on, the operation display
corresponding to the button operation is shown
for about 30 seconds and the display returns to
the screen saver display.
4. Press the [TITLE] button to return to the pre-
vious mode.
Setting the DEMO mode
The demonstration of each function is repeatedly
shown on the display screen. The demonstra-
tion starts about few seconds after power off.
∗ The factory default setting is “ON”.
1. Press and hold the [TITLE] button for 1 sec-
ond or longer to switch to the adjustment se-
lection display.
∗ The factory default setting is “OFF”.
ADB340MP/ADB341MP
17
Operations Common to Each Mode
2. Press the [
] or [
] button to select
AUX function
This system has an external input jack so you
can listen to sounds and music from external
devices when connected to this unit.
“DEMO”.
3. Turning the [VOLUME] knob clockwise to
“ON” or counterclockwise to “OFF”.
4. Press the [TITLE] button to return to the pre-
vious mode.
Entering titles
Titles up to 10 characters long can be stored in
memory and displayed for CDs only. The num-
bers of titles that can be entered for 50 titles.
1. Press the [FNC] button to select the CD mode.
2. Select and play a CD.
3. Press the [DISP] button and display the title.
“
NO TITL” will be displayed.
4. Press the [TITLE] button. “TITL” appears in
the display and the cursor position flashes.
5. Press the [
cursor.
] or [
] button to move the
6. Press the [DISP] button to select a character.
Each time you press the [DISP] button, the
character changes in the following order:
Capital letters G Small letters G Numbers/
Symbols G Capital letters...
7. Turning the [VOLUME] knob either clockwise
or counterclockwise to select the desired char-
acter. Pressing the [
cursor to the next character; pressing the
] button moves the cursor to the previ-
] button moves the
[
ous character.
8. Repeat steps 5 to 7 to enter up to 10 charac-
ters for the title.
9. Press and hold the [
] button for 1 sec-
onds or longer to store the title into memory
and cancel title input mode.
Clearing titles
1. Play a CD that you want to clear the title for.
2. Press the [DISP] button and display the title.
3. Press the [TITLE] button. “TITL” appears in
the display and the display switches to the
title input display.
4. Press the [BND] button.
5. Press and hold the [
] button for 1 sec-
onds or longer to clear the title and cancel
the title input mode.
18
ADB340MP/ADB341MP
6. IN CASE OF DIFFICULTY
Problem
Cause
Measure
Power does not turn
on.
(No sound is
produced.)
Fuse is blown.
Replace with a fuse of the same amperage. If
the fuse blows again, consult your store of
purchase.
Incorrect wiring.
Consult your store of purchase.
No sound output
when operating the
unit with amplifiers
or power antenna
attached.
Power antenna lead is
shorted to ground or
excessive current is
required for remote-on
the amplifiers or power
antenna.
1. Turn the unit off.
2. Remove all wires attached to the power
antenna lead. Check each wire for a
possible short to ground using an ohm
meter.
3. Turn the unit back on.
4. Reconnect each amplifier remote wire to the
power antenna lead one by one. If the
amplifiers turn off before all wires are
attached, use an external relay to provide
remote-on voltage (excessive current
required).
Nothing happens
when buttons are
pressed.
The microprocessor has
malfunctioned due to
noise, etc.
Press the CD eject button for more than 10
seconds to reset.
Display is not
accurate.
Compact disc
cannot be loaded.
Another compact disc is
already loaded.
Eject the compact disc before loading the new
one.
No sound heard
MP3 files are absent in a
disc.
Write MP3 files onto the disc properly.
Files are not recognized
as an MP3 file.
Use MP3 files encoded properly.
File system is not correct.
Use ISO9660 level 1, 2 or JOLIET or Romeo
file system.
Sound is cut or
skipped.
MP3 files are not
encoded properly.
Use MP3 files encoded properly.
Noise is generated
or noise is mixed
with sound.
Sound skips or is
noisy.
Compact disc is dirty.
Clean the compact disc with a soft cloth.
Compact disc is heavily
scratched or warped.
Replace with a compact disc with no
scratches.
Sound is bad
directly after power
is turned on.
Water droplets may form
on the internal lens when
the car is parked in a
humid place.
Let dry for about 1 hour with the power on.
Wrong filename
File system is not correct.
Use ISO9660 level 1, 2 or JOLIET or Romeo
file system.
Sound quality is
poor.
Playback head is dirty.
Use a cleaning tape, etc., to clean the head.
ADB340MP/ADB341MP
19
7. ERROR DISPLAYS
If an error occurs, one of the following displays is displayed.
Take the measures described below to eliminate the problem.
Error Display
Cause
Measure
ERROR 2
A CD is caught inside the CD deck and is
not ejected.
This is a failure of CD deck’s mechanism
and consult your store of purchase.
ERROR 3
ERROR 6
ERROR
A CD cannot be played due to scratches,
etc.
Replace with a non-scratched,
non-warped-disc.
A CD is loaded upside-down inside the CD
deck and does not play.
Eject the disc then reload it properly.
Tape is caught and cannot be ejected.
This is a failure of Tape deck’s mechanism
and consult your store of purchase.
If an error display other than the ones described above appears, press the CD eject button for more
than 10 seconds to reset. If the problem persists, turn off the power and consult your store of purchase.
8. SPECIFICATIONS
FM Tuner
Audio
Frequency Range:
Maximum Power Output:
87.9 MHz to 107.9 MHz (ADB340MP)
200 W (50 W × 4 ch) (JEITA)
Continuous Average Power Output:
87.0 MHz to 108 MHz
(ADB341MP)
Usable Sensitivity: 11 dBf
17 W × 4, into 4 , 20 Hz to 20 kHz, 1%THD
50dB Quieting Sensitivity: 17 dBf
Bass Control Action (100 Hz): ±10 dB
Middle Control Action (1 kHz): ±10 dB
Treble Control Action (10 kHz): ±10 dB
Line Output Level (CD 1kHz): 1.8 V
Alternate Channel Selectivity: 75 dB
Stereo Separation (1 kHz): 35 dB
Frequency Response (±3 dB): 30 Hz to 15 kHz
AM Tuner
General
Frequency Range:
Power Supply Voltage:
530 kHz to 1710 kHz
531 kHz to 1629 kHz
(ADB340MP)
(ADB341MP)
14.4 V DC (10.8 to 15.6 V allowable),
negative ground
Usable Sensitivity: 25 µV
Current Consumption: Less than 15 A
Speaker Impedance:
CD Player
4 Ω (4 Ω to 8 Ω allowable)
Frequency Response (±1 dB): 10 Hz to 20 kHz
Signal to Noise Ratio (1 kHz): 100 dB
Dynamic Range (1 kHz): 95 dB
Weight / Source unit: 4.6 lb. (2.1 kg)
Dimensions / Source unit:
7" (Width) × 3-15/16" (Height) × 7 -1/4" (Depth)
[178 (W) × 100 (H) × 183 (D) mm]
Harmonic Distortion: 0. 01%
Notes:
Tape Deck
Wow & Flutter (WRMS): 0.06 %
• Specifications and design are subject to change
without notice for further improvement.
Channel Separation (1 kHz): 45 dB
Frequency Response (±3 dB)
120 µs (normal): 30 Hz to 18 kHz
20
ADB340MP/ADB341MP
|